Valcom V-2920 Especificaciones descargar pdf (Pagina 40)

E-MAIL – [email protected] • INTERNET – www.targetd.com

PAGING

ZPM-3 3-Zone Paging Controller

• 3 Zone paging plus All-Call

• 3 Field-programmable paging

zone groups(1-3 zones in each)

• One-way and two-way paging

(talk back operation requires

TBA15 Talk Back amplier)

• Direct connection to page ports

(requires contact closures), loop-start

and ground start trunks

• Connection to an analog station line (station port) possible when used

with a suitable telephone access module, e.g., Bogen Model TAMB2

• 100W total power handling capacity • Background music input

• Works with self-amplied or central-amplied paging systems

• 24V power supply required; Bogen Model PRSLSI recommended

• 1 to 99 paging zones and up to 32 programmable

paging zone groups

• Emergency All-Zone Override Paging input

• 250W power handling capacity (separate amplier required)

• Operates with 70V and self-amplied (24V) paging systems

• Select zones or groups for background music, night ringer,

code calling, tones, & talkback

• Drives up to 25 self-amplied speakers in low-power mode

• Works with systems that are central-, self-amplied or mixed • All-call function can be disabled

• Wall mountable (brackets included) • Easily programmed via phone

MAXIMIZE PROFITS––RECOMMEND PAGING WITH EVERY PHONE SYSTEM

ZONE CONTROLLERS • RECEIVERS • POWER SUPPLIES

PCM2000 Zone Controller

The Bogen PCM-2000 introduces a convenient

new concept to telephone zone paging and control

– modular integration.

PCMCPU Central Processor

PCMZPM 3 Zone Module

PCMTIM Telephone Interface

PCMTBM Talkback Module

PCMPS-2 Power Supply

• Provides 1 to 3 paging zones • Expandable up to 99 zones

• Up to 32 programmable paging zone groups

• Emergency All-Zone Override Paging input

• Two-way Communications

• 250W power handling capacity • Code Calling

• Background music distribution works with systems that are

central- or self-amplied

• Drives up to 40 self-amplied speakers per zone module

• Night Ringer, 90V and contact closure

• Real-time Clock & Master Clock Synchronization

Some features described above require

additional equipment

PCMSYS3 3-Zone PCM System

The PCMSYS3 is a pre-assembled and tested

3-zone PCM system with a PCMPS2 power

supply. Use it right out of the box for 1 to 3

zone applications or expand it with other PCM

modules. Provides all the same great features

found in the PCM2000 zone paging system

shown above.

1 PCMTIM

Telephone Interface module

1 PCMCPU Central Processor module

1 PCMZPM 3-Zone Paging module

1 PCMPS2 System Power Supply

UNIVERSAL AUDIO PROCESSOR

TAMB2PS Access Module

• Interfaces a telephone system with a paging system to allow

paging announcements to be made through any telephone

• Updated version of the venerable TAMB, functionally the same

• Loop start, ground start, & station port (90V ring up) compatibility

• Bi-directional for two-way systems

• Rack-mount or wall-mount

• Background music input with volume control

• Power supply included

DRZ35 Receiver and 4-Zone Music and Paging System

• 35W amplier for 4-ohm, 25V, or 70V speaker systems

• Built-in AM/FM tuner, PLL-synthesized tuning for drift-free operation

• 20 total presets (10 AM & 10 FM)

• Vox-activated MIC override • 3 inputs: 1 MIC, 1 AUX, 1 LINE

• Master volume, bass and treble controls, 5-segment output meter

• Four speaker zone switches allow paging in up to four different

areas, any combination

RECEIVER & 4-ZONE MUSIC/PAGING SYSTEM

BOMDMU Messaging and Call Stacking System

Bogenʼs BOMDMU is a comprehensive system that combines page

stacking, feedback elimination, pre-recorded messaging, and

background music control in a single device.

• 3-channel page stacker & feedback eliminator • Priority input • Station or Dry Loop/Loop Start operation • DTMF support for zoning

• 99 pre-recorded messages in non-volatile FLASH memory • Message triggering via start input or host telephone system workstation

• Industrial construction • Background music support • Rack mount chassis

CORE 8X8

• 8 analog inputs/outputs • Conguration via PC/Laptop

• Programmable, scalable front panel knobs for DSP functions

• Third-party control via RS-232 or IP commands

• Full DSP drag-and-drop component library • Stack up to 12 units

• Up to 53 minutes of audio can be stored inside the box and output

2 separate messages simultaneously to independent zones;

messages can be activated using TTL inputs or via the built-in

Scheduler • 16 built-in TTL inputs & 8 logic outputs

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Comentarios a estos manuales

Sin comentarios

Valcom V-2920 Especificaciones Pagina 40

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas de intercomunicación de la puerta Valcom V-2920