Valcom ONE-WAY PAGING SYSTEM Manual de usuario Pagina 15

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 19
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 14
Phone
Phone Type
Phone Type is used to configure the VE6023 for operation with Avaya or Cisco phone systems.
Changing this setting requires software to log the user out of the system before it can take effect. This
setting controls the visibility of the Cisco and Avaya tabs as well.
Interrupt Priority
High priority pages have the ability to interrupt phone calls. This setting controls the threshold at
which a page will interrupt a phone call, even if that phone has disabled Page Interrupt.
Page Delay
The Page Delay feature forces the VE6023 to delay a given number of seconds between detecting a
page on the network, and broadcasting that page over the phone system.
Cisco
Name
Select a descriptive name for this server. This value is not used by the VE6023.
Call Manager Type
At the time of this writing there is only one value for this selection.
IP
Enter the IP address of the Cisco Unified Call Manager.
User
Enter the user name that was created for the VE6023 in the previous section.
Password
Enter the password that was created for the VE6023 in the previous section.
Confirm Password
Confirm the password that was created for the VE6023 in the previous section.
Test Connection Settings
Once all the information has been entered, click this button to ensure that the log in details are correct.
Additionally, this step will verify that some of the permissions were correctly added to this user
account.
In some cases the VE6023 will display the error message “System must be configured for cisco
phones.” To resolve this problem, click the submit button at the button of the setup window then
refresh the browser window. Log back in to the web page and reenter the setup window, the Test
Connection Settings button will now be able to confirm the log credentials.
Avaya
Push Port
This port number is used by the phones to validate page requests. Changing this value requires that the
Avaya servers are also changed to the new value.
Add Server
If you have multiple Avaya servers you can add them all to the VE6023. Use this button to add
additional tabs to enter the server information in the area below. If too many tabs are opened, use the
close tab button on the tab itself.
VE6023 Telephone Page Server - User Manual Page 15
Vista de pagina 14
1 2 ... 10 11 12 13 14 15 16 17 18 19

Comentarios a estos manuales

Sin comentarios